Hydraulic Compacted Baler Machine
Hydraulic compression baler is a device that uses hydraulic principles for compression and baling. It is mainly used to compress and pack various loose materials, such as waste paper, waste plastics, straw, wheat straw, etc., for easy transportation and storage. The machine has the characteristics of large compression force, high efficiency and simple operation.
The working principle of the hydraulic compression baler is to use the high-pressure liquid generated by the hydraulic system to push the piston to compress the material. When the pressure reaches the set value, the machine will automatically stop compression and start packaging operation. After packaging is completed, the machine will automatically release and the compressed material package can be taken out.
The main components of the hydraulic compression baler include hydraulic system, compression chamber, baling device, control system, etc. Among them, the hydraulic system is the core part of the machine, which determines the compression force and efficiency of the machine. The compression chamber is where materials are compressed, and its design directly affects the compression effect and packaging quality. The packaging device is responsible for packaging the compressed materials for transportation and storage. The control system is the brain of the entire machine. It controls all parts of the machine to work together by receiving signals from various sensors.
Overall, a hydraulic compression baler is an efficient and practical piece of equipment that is widely used in waste treatment, agriculture, industry and other fields.
Name | parameter |
Bale size | 1100mm（W）×1100mm（H）×～1800mm(L) |
Material type | Scrap Kraft paper, Newspaper, Cardboard ,Soft Film, Plastic， |
Material density | 650～750Kg/m3（Moistures 12-18%） |
Feed opening size | 2400mm×1100mm |
Main motor power | 37KW×2sets+15KW |
Main cylinder | YG300/230-2900 |
Main cylinder force | 200T |
Capacity | 28-30Ton/hour |
Max. system working force | 30.5MPa |
Mainframe weight(T) | About 30 tons |
Oil tank | 2m3 |
Mainframe size | About 11×4.3×5.8M（L×W×H） |
Tie wire line | 4 line φ3.0-3.2mm3 iron wire |
Pressure time | ≤30S/ (go and back for empty load) |
Model | NK-III |
Conveyor weight | About 7 tons |
Conveyor size | 2000*14000MM |
terra hole size | 7.303M（L）×3.3M（W）×1.2M（deep） |
Conveyor motor | 7.5KW |
Cool tower motor | 0.75KW（water Pump）+0.25（Fan） |
*Get a quotation